No products in the cart.
- Default sorting
Cu(AL)/XLPE/SWA/PVC LV armoured Cable
Conductor: Plain annealed stranded copper.
Insulation: XLPE (Cross linked polyethylene)
Bedding: PVC (Polyvinyl-Chloride)
Armour/Protection: SWA (Galvanised single wire armour)
Sheath/Jacket: PVC (Polyvinyl-Chloride)
Operating temperature: Maximum 90°C. Minimum bending 0°C.
Operating voltage:1000 V
Test voltage: 3500V, according to IEC 60502
Operation temperature:–25°C to + 90°C
Permissible short therm: + 250°C
1.5mm2 to 16mm2 – Fixed: 6 x overall diameter
25mm2 and above – Fixed: 8 x overall diameter
Cu(AL)/XLPE/SWA/PVC LV armoured Cable Application:Cu(AL)/XLPE/SWA/PVC LV armoured Cable is a aluminum or copper cable with XLPE insulation SWA Armour. They are used for power networks, direct burial, outdoors, indoors and in cable ducts for electricity supply in low voltage installation system
BS5467: Electric cables. Thermosetting insulated, armoured cables for voltages of 600/1000V and 1900/3300V
IEC60502: Power cables with extruded insulation and their accessories for rated voltages from 1kV to 30kV
Flame Propagation Test to BS EN 60332-1-2 for single cable
Special version upon request:
Fire resistant version
LSZH sheath version
AWA,SWA,STA armoured version
PE sheath version
Two Core – Brown, Blue
Three Core – Brown, Black & Grey (Optional: Brown, Blue & Green/Yellow)
Four Core – Brown, Black, Grey & Blue (Optional: Brown, Black, Grey & Green/Yellow)
Five Core – Numbered Cores (Optional: Brown, Black, Grey, Blue + Green/Yellow)
Six Core and Above – Numbered Cores (optional numbered + Green and Yellow)
Equip and transform your kitchen into an atmosphere of bliss, with this best heat extractor for better airflow and a conducive environment,this kitchen crafted brand cooker hood extractor built to standard for great performance will extract all heat from your kitchen while cooking.
- Capacity: 1.5KVA
- Fuel Tank Capacity: 8.5 Liters
- Engine: 4 Stroke
- 300 hours Continuous Running Design
- Better Fuel Efficiency and Engine Vibration.
- Easy Start Up
- Superior quality alternator.
- Starting: Manual
Converts the DisplayPort connector on a HP Workstation computer to a single link DVI-D port. The adapter has a latching DisplayPort connector on one end and DVI-D connector on the other for connecting to a DVI-D monitor cable.₦14,000.00₦14,000.00
Original Sollatek Volt-shield stabilizers Switchers, protect your appliances against power surge fluctuations voltage damage with an inbuilt surge protector/suppressor. This unit features, wide input voltage Range: 220V ~ 270V design for that extra reliability voltage protection, sleek compact design, Resettable circuit breaker, Delay/underlay function, Built to last with European standard, comes in different sizes(KVA) for higher loads, for people of style and comfort.