Products 1 - 12 from 72. Products on page
  • 25mm Copper Earth Tapes – per Meter

    Flat copper tape in comparison to stranded copper cable is considered as the most efficient conductor for the transfer of lightning energy to the ground mass. Flat tape provides greater surface contact with the surrounding soil which assists greatly in the dissipation of the lightning energy.

    4,620.005,100.00
  • Furse Copper Lattice Earth Mat & Plates

    Lattice Earth Plates offer a more economical option to installing solid copper plates. They are often used for potential grading and are a preferred option on telecommunications towers.

    6,400.00
  • 35mm Coleman Recline Cable (Per Meter)

    A power cable is an electrical cable, an assembly of one or more electrical conductors, usually held together with an overall sheath. The assembly is used for transmission of electrical power. Power cables may be installed as permanent wiring within buildings, buried in the ground, run overhead, or exposed.
    Power cables use stranded copper or aluminum conductors, although small power cables may use solid conductors .
    Cables consist of three major components: conductors, insulation, protective jacket. The makeup of individual cables varies according to application

    1,950.002,000.00
  • 4x240mm^² PVC/SWA/PVC 600/1000V Kabelmetal Cable /meter

    Cu(AL)/XLPE/SWA/PVC LV armoured Cable

    Conductor: Plain annealed stranded copper.

    Insulation: XLPE (Cross linked polyethylene)

    Bedding: PVC (Polyvinyl-Chloride)

    Armour/Protection: SWA (Galvanised single wire armour)

    Sheath/Jacket: PVC (Polyvinyl-Chloride)

    Voltage: 600/1000v

    Operating temperature: Maximum 90°C. Minimum bending 0°C.

    Technical data:
    Operating voltage:1000 V

    Test voltage: 3500V, according to IEC 60502

    Operation temperature:–25°C to + 90°C

    Permissible short therm: + 250°C

    Bending radius:

    1.5mm2 to 16mm2 – Fixed: 6 x overall diameter

    25mm2 and above – Fixed: 8 x overall diameter

    Cu(AL)/XLPE/SWA/PVC LV armoured Cable Application:Cu(AL)/XLPE/SWA/PVC LV armoured Cable is a aluminum or copper cable with XLPE insulation SWA Armour. They are used for power networks, direct burial, outdoors, indoors and in cable ducts for electricity supply in low voltage installation system

    Standard:
    BS5467: Electric cables. Thermosetting insulated, armoured cables for voltages of 600/1000V and 1900/3300V

    IEC60502: Power cables with extruded insulation and their accessories for rated voltages from 1kV to 30kV

    Flame Propagation Test to BS EN 60332-1-2 for single cable

    Special version upon request:
    Fire resistant version

    LSZH sheath version

    AWA,SWA,STA armoured version

    PE sheath version

    Core identification:
    Two Core – Brown, Blue

    Three Core – Brown, Black & Grey (Optional: Brown, Blue & Green/Yellow)

    Four Core – Brown, Black, Grey & Blue (Optional: Brown, Black, Grey & Green/Yellow)

    Five Core – Numbered Cores (Optional: Brown, Black, Grey, Blue + Green/Yellow)

    Six Core and Above – Numbered Cores (optional numbered + Green and Yellow)

    45,000.0051,000.00
  • 4x240mm^² PVC/SWA/PVC 600/1000V Cutix Copper Cable

    Cu(AL)/XLPE/SWA/PVC LV armoured Cable

    Conductor: Plain annealed stranded copper.

    Insulation: XLPE (Cross linked polyethylene)

    Bedding: PVC (Polyvinyl-Chloride)

    Armour/Protection: SWA (Galvanised single wire armour)

    Sheath/Jacket: PVC (Polyvinyl-Chloride)

    Voltage: 600/1000v

    Operating temperature: Maximum 90°C. Minimum bending 0°C.

    Technical data:
    Operating voltage:1000 V

    Test voltage: 3500V, according to IEC 60502

    Operation temperature:–25°C to + 90°C

    Permissible short therm: + 250°C

    Bending radius:

    1.5mm2 to 16mm2 – Fixed: 6 x overall diameter

    25mm2 and above – Fixed: 8 x overall diameter

    Cu(AL)/XLPE/SWA/PVC LV armoured Cable Application:Cu(AL)/XLPE/SWA/PVC LV armoured Cable is a aluminum or copper cable with XLPE insulation SWA Armour. They are used for power networks, direct burial, outdoors, indoors and in cable ducts for electricity supply in low voltage installation system

    Standard:
    BS5467: Electric cables. Thermosetting insulated, armoured cables for voltages of 600/1000V and 1900/3300V

    IEC60502: Power cables with extruded insulation and their accessories for rated voltages from 1kV to 30kV

    Flame Propagation Test to BS EN 60332-1-2 for single cable

    Special version upon request:
    Fire resistant version

    LSZH sheath version

    AWA,SWA,STA armoured version

    PE sheath version

    Core identification:
    Two Core – Brown, Blue

    Three Core – Brown, Black & Grey (Optional: Brown, Blue & Green/Yellow)

    Four Core – Brown, Black, Grey & Blue (Optional: Brown, Black, Grey & Green/Yellow)

    Five Core – Numbered Cores (Optional: Brown, Black, Grey, Blue + Green/Yellow)

    Six Core and Above – Numbered Cores (optional numbered + Green and Yellow)

    70,000.0074,000.00
  • 12 Feet Fiberglass Ladder

    Fiberglass 12 ft single sided stepladder is now loaded with new advanced features. Multifunctional Holster Top PRO keeps tools organized and safe on the ladder top. A magnetic strip and hardware bins keep parts and tools easily accessible and secure. The right handed drill hammer slot and pipe channel are conveniently located for ease of use. Comfortable slip resistant steps.

    121,000.00140,000.00

    12 Feet Fiberglass Ladder

    121,000.00140,000.00
  • Pedrollo Submersible (Sumo) Pump 1.5KW / 2HP

    RANGE OF PERFORMANCE
    Flow rate up to 375 l/min (22.5 m3/h)
    Head up to 525 m

    LIMITS OF USE
    Liquid temperature up to +30°C
    Maximum sand content 150 g/m3
    Starts/hour: 20 at regular intervals

    INSTALLATION AND USE
    They are recommended for pumping clean water with a sand content no higher than 150 g/m3. there high efficiency and reliability make them suitable for use in the domestic, civil and industrial sectors, including for water supplies as part of a pressure set, irrigation, wash down systems, pressure boosting and firefighting systems.

    Guarantee 2 years subject to our general terms of sale.

    165,000.00
  • LED High Bay Lights TSP 200W

    Description LED high-bay luminaire 200w

    • Beam Angle – 120°
    • Accent lighting – Yes
    • Warm up time – Instant
    • Dimmable – No
    • Power input – 200W, 110 – 277VAC
    • Power factor, current 0.9
    • Lamp type CREE
    36,000.00
  • HiClean LED High Bay Light HB04-200W

    i. Beam angle: 90 & 120 degrees
    ii. Intelligent light system for your industrial, Sports or Assembly areas
    iii. Green, energy savings, long and reliable life of 100,000 hours
    iv. No RF interference, No IR/UV radiation, no mercury pollution
    v. Wide color availability in degrees Kelvin(K), 3000, 4000, 5000K
    vi. Superior Uniformity; Superior Temperature Stability
    vii. Temperature tested for the toughest conditions
    viii. Environmental friendly, energy savings (to 90%),
    ix. Special circuit design, each LED work separately, avoiding the single broken x. LED influence problem
    xi. Control options – Occupancy/DALI, 1-10V Dimming, Wireless, and Daylight Sensor
    xii. DLC Listed, UL, SAA, CE, ENEC, GS, SASO, DMark, EMC, ROHS Approved
    xiii. This high bay is suitable for fresh and frozen meat processing plants, fruit and vegetable processing and canning facilities.
    xiv. Equal to 400-600W HID xv. Luminous Flux – 19,500lm

    173,000.00
  • Luceco LED Highbay Light LHBR 200W (31200lm)

    Product Features

    IP65 highbay with industry-leading efficacy Multiple mounting options Integrated heat sink IP65 PIR sensor compatible IP65 Integrated emergency Stainless steel hardware 0-10V Dimmable Supplied with 2′ of SJTW cable 1′ safety chain included Color

    Temperature: 4000K, 5000K

    Efficiency: Up to 160lm/W Lumen

    Maintenance: L70 calculated at 100,000hrs

    IP Rating: IP65 Beam

    Angle: 60°, 90°, 120°

    195,000.00

Shop by Department